Tank Sandblasting For Coating-Ready Storage Tanks
Abrasive blasting for fuel, oil, water, wastewater, process, and aboveground storage tanks in Ohio, the Midwest, and nationwide.
MPC handles tank sandblasting for storage tanks that need failed coating, rust, corrosion, residue, or contamination removed before recoating, lining, inspection, or repair.
Our crews prepare tank exteriors and accessible interiors to the required SSPC/NACE cleanliness and surface profile. We account for tank contents, site hazards, access, containment, ventilation, and the coating system before work begins.
Tank blasting can be coordinated with primer, exterior coating, or lining work to reduce exposure time between surface preparation and coating. We do not provide consumer tank refinishing, equipment rental, DIY blasting, powder coating, or pressure washing.
Our Work
Storage tank blasting
Night tank blasting
Interior tank blasting
Tank top crew work
Steel beam after blasting
Storage tank blasting
Night tank blasting
Interior tank blasting
Tank top crew work
Steel beam after blasting
Tank Sandblasting Scope
Tank Types
Storage tank blasting for industrial owners, facility teams, and coating projects.
- Aboveground storage tanks
- Fuel, oil, diesel, and petroleum tanks
- Water and wastewater tanks
- Process, agricultural, and facility tanks
Tank Types
Storage tank blasting for industrial owners, facility teams, and coating projects.
- Aboveground storage tanks
- Fuel, oil, diesel, and petroleum tanks
- Water and wastewater tanks
- Process, agricultural, and facility tanks
Tank Surface Preparation
Surface prep that supports coating adhesion, inspection, and corrosion-control work.
- Old coating, rust, corrosion, and contaminant removal
- SSPC/NACE profile for tank primers and linings
- Interior and exterior blasting where access allows
- Salt, chloride, dust, and profile checks when specified
Containment & Coating Coordination
Controls and sequencing planned around tank location, operations, and coating requirements.
- Containment, dust control, and debris collection
- Access equipment and work-area planning
- Blast-and-coat scheduling to reduce flash rust
- Ohio, Midwest, and nationwide commercial service
Our Process
Consultation & Assessment
We evaluate the asset, coating condition, substrate, access, schedule, and specification before recommending the blasting method and media.
We evaluate the asset, coating condition, substrate, access, schedule, and specification before recommending the blasting method and media.
We select the media and equipment needed to remove coatings or corrosion while achieving the required surface profile.
We set up containment, collection, ventilation, and safety controls appropriate for the site and scope.
Our operators blast to the required cleanliness and profile while monitoring conditions that affect coating readiness.
We verify the prepared surface, clean the work area, and coordinate the next coating step when painting or lining is part of the project.
The MPC Difference
Why Choose Markley's Precision
Industrial Surface Preparation Focus
Crews built for tanks, structural steel, heavy equipment, fabrication, and operating commercial facilities.
SSPC/NACE Profile Control
Surface profile, cleanliness, dust, salts, chlorides, and coating readiness are checked against the project specification.
Containment & Dust Planning
Containment, collection, wet abrasive options, and site controls are planned around active industrial environments.
Method Matched To The Asset
Abrasive, wet abrasive, dry ice, soda, shot, bristle, laser, and water-jetting options are selected for the substrate and coating system.
Zero-Silica Media Options
Recycled crushed glass, garnet, and other silica-free media options support safer work areas and cleaner project closeout.
Blast-And-Coat Coordination
When coating is part of the scope, blasting and painting can be scheduled together to reduce downtime and flash-rust risk.
OSHA, EPA & DOT Awareness
Safety, environmental controls, access planning, and site documentation are part of the commercial project workflow.
Ohio, Midwest & Nationwide
Ohio-based crews mobilize for commercial and industrial sandblasting projects across the Midwest and the United States.
Frequently Asked Questions
We sandblast aboveground storage tanks, fuel and oil tanks, water and wastewater tanks, process tanks, agricultural tanks, and related industrial storage assets. Access, contents, coating condition, and safety requirements are reviewed before mobilization.
Yes. When coating is in scope, we coordinate blasting, surface profile checks, primer, lining, and exterior coating sequencing so prepared steel is protected as soon as practical.
Yes. Containment, dust control, debris collection, access planning, and cleanup are planned around the tank location, surrounding operations, weather, and coating specification.
What Our Clients Say
“Markley Precision Company was easy to work with and the quality of their work is second to none. I have used them on three separate projects and have been very pleased with the quality of work each time. No job seems to be too big or too small. I have used them to blast and paint a 30,000 gallon propane tank, and to blast and paint our vertical bulk storage vessels for nitrogen, oxygen, and argon. They've even done work for me on the Lake Erie Islands, as well, which presented logistical challenges, but MPC didn't miss a beat. I would recommend MPC 100 out of 100 times.”
Matt Drennen
“Very happy with the work completed so far with MPC. Last year, I had them paint 5 of our 30,000 gallon bullet tanks. The work was completed quickly and professionally. With a years worth of age on them now, they still look as good as new! I was so pleased with their work on the tanks, I hired them to complete an even larger, more complex project blasting and recoating a natural gas processing mechanical refrigeration unit. Even when some concerns came up, they quickly remediated the situation. Extremely happy with the work they've performed!”
Paul Teeters
“MPC Sandblasting and Painting have serviced various locations for us. They have ensured a positive experience from start to finish. The staff is very helpful and quick with responses as well as their services. Their work is just as great! We look forward to many more opportunities to work with this team.”
Lindsey Bennett
“MPC Sandblasting has performed admirably in providing blasting services to US Screen in support of our operations. Their approach is very professional and their pricing is good for the quality of the work performed.”
Doug Dickason
“MPC is a fantastic company to work with. They are really fast with getting information as needed and do great work.”
Danny Keith
“MPC painted our 6 bulk storage tanks and did a great job!”
James Deiter
“Markley Precision Company was easy to work with and the quality of their work is second to none. I have used them on three separate projects and have been very pleased with the quality of work each time. No job seems to be too big or too small. I have used them to blast and paint a 30,000 gallon propane tank, and to blast and paint our vertical bulk storage vessels for nitrogen, oxygen, and argon. They've even done work for me on the Lake Erie Islands, as well, which presented logistical challenges, but MPC didn't miss a beat. I would recommend MPC 100 out of 100 times.”
Matt Drennen
“Very happy with the work completed so far with MPC. Last year, I had them paint 5 of our 30,000 gallon bullet tanks. The work was completed quickly and professionally. With a years worth of age on them now, they still look as good as new! I was so pleased with their work on the tanks, I hired them to complete an even larger, more complex project blasting and recoating a natural gas processing mechanical refrigeration unit. Even when some concerns came up, they quickly remediated the situation. Extremely happy with the work they've performed!”
Paul Teeters
“MPC Sandblasting and Painting have serviced various locations for us. They have ensured a positive experience from start to finish. The staff is very helpful and quick with responses as well as their services. Their work is just as great! We look forward to many more opportunities to work with this team.”
Lindsey Bennett
“MPC Sandblasting has performed admirably in providing blasting services to US Screen in support of our operations. Their approach is very professional and their pricing is good for the quality of the work performed.”
Doug Dickason
“MPC is a fantastic company to work with. They are really fast with getting information as needed and do great work.”
Danny Keith
“MPC painted our 6 bulk storage tanks and did a great job!”
James Deiter
Ready to Get Started?
Contact us today for a free quote on your project. Our team of experts is ready to help with all your industrial painting and sandblasting needs.