Abrasive Blasting & Painting Contractors
Commercial blast-and-coat services for structural steel, tanks, equipment, and industrial assets across Ohio, the Midwest, and nationwide.
MPC coordinates abrasive blasting and painting for commercial and industrial steel that needs a coating-ready profile followed by protective primer, lining, or topcoat application.
Blasting removes rust, failed coating, mill scale, and contaminants. Painting protects the prepared profile with a coating system selected for the asset, environment, exposure, and specification.
We support tanks, structural steel, heavy equipment, machinery, fabrication, and facility assets. This is industrial protective coating work, not powder coating, pressure washing, consumer auto/frame work, equipment rental, or DIY blasting.
Our Work
Steel fabrication blasting
Industrial crane frames
Factory equipment finishing
Steel frames lineup
Steel beam after blasting
Steel fabrication blasting
Industrial crane frames
Factory equipment finishing
Steel frames lineup
Steel beam after blasting
Abrasive Blasting & Painting Scope
Blast, Prime & Paint
A coordinated process from surface preparation through coating application.
- Abrasive blasting to the required SSPC/NACE profile
- Primer, intermediate, and topcoat coordination
- DFT checks and environmental-condition monitoring
- Reduced delay between blast cleaning and coating
Blast, Prime & Paint
A coordinated process from surface preparation through coating application.
- Abrasive blasting to the required SSPC/NACE profile
- Primer, intermediate, and topcoat coordination
- DFT checks and environmental-condition monitoring
- Reduced delay between blast cleaning and coating
Assets We Blast And Paint
Protective coating support for industrial and commercial steel assets.
- Tanks, structural steel, and fabricated components
- Heavy equipment, machinery, and crane frames
- Facility steel and exposed infrastructure
- Commercial and industrial corrosion-control projects
Quality Control & Handoff
Surface prep and coating checks built into the project flow.
- Profile, cleanliness, dust, salt, and chloride checks when specified
- Wet film and dry film thickness verification
- Containment and cleanup around active facilities
- Ohio, Midwest, and nationwide mobilization
Our Process
Consultation & Assessment
We evaluate the asset, coating condition, substrate, access, schedule, and specification before recommending the blasting method and media.
We evaluate the asset, coating condition, substrate, access, schedule, and specification before recommending the blasting method and media.
We select the media and equipment needed to remove coatings or corrosion while achieving the required surface profile.
We set up containment, collection, ventilation, and safety controls appropriate for the site and scope.
Our operators blast to the required cleanliness and profile while monitoring conditions that affect coating readiness.
We verify the prepared surface, clean the work area, and coordinate the next coating step when painting or lining is part of the project.
The MPC Difference
Why Choose Markley's Precision
Industrial Surface Preparation Focus
Crews built for tanks, structural steel, heavy equipment, fabrication, and operating commercial facilities.
SSPC/NACE Profile Control
Surface profile, cleanliness, dust, salts, chlorides, and coating readiness are checked against the project specification.
Containment & Dust Planning
Containment, collection, wet abrasive options, and site controls are planned around active industrial environments.
Method Matched To The Asset
Abrasive, wet abrasive, dry ice, soda, shot, bristle, laser, and water-jetting options are selected for the substrate and coating system.
Zero-Silica Media Options
Recycled crushed glass, garnet, and other silica-free media options support safer work areas and cleaner project closeout.
Blast-And-Coat Coordination
When coating is part of the scope, blasting and painting can be scheduled together to reduce downtime and flash-rust risk.
OSHA, EPA & DOT Awareness
Safety, environmental controls, access planning, and site documentation are part of the commercial project workflow.
Ohio, Midwest & Nationwide
Ohio-based crews mobilize for commercial and industrial sandblasting projects across the Midwest and the United States.
Frequently Asked Questions
Freshly blasted steel can flash rust or become contaminated if coating is delayed. Coordinating blasting and painting helps protect the prepared profile, reduce downtime, and keep the coating system aligned with the project specification.
Typical commercial and industrial scopes include tanks, structural steel, equipment, machinery, fabrication, facility steel, and infrastructure components that require corrosion-control coating systems.
No. MPC provides industrial abrasive blasting and protective coating services. We do not offer powder coating, pressure washing as a standalone consumer service, equipment rental, DIY blasting, or consumer auto/frame work.
What Our Clients Say
“Markley Precision Company was easy to work with and the quality of their work is second to none. I have used them on three separate projects and have been very pleased with the quality of work each time. No job seems to be too big or too small. I have used them to blast and paint a 30,000 gallon propane tank, and to blast and paint our vertical bulk storage vessels for nitrogen, oxygen, and argon. They've even done work for me on the Lake Erie Islands, as well, which presented logistical challenges, but MPC didn't miss a beat. I would recommend MPC 100 out of 100 times.”
Matt Drennen
“Very happy with the work completed so far with MPC. Last year, I had them paint 5 of our 30,000 gallon bullet tanks. The work was completed quickly and professionally. With a years worth of age on them now, they still look as good as new! I was so pleased with their work on the tanks, I hired them to complete an even larger, more complex project blasting and recoating a natural gas processing mechanical refrigeration unit. Even when some concerns came up, they quickly remediated the situation. Extremely happy with the work they've performed!”
Paul Teeters
“MPC Sandblasting and Painting have serviced various locations for us. They have ensured a positive experience from start to finish. The staff is very helpful and quick with responses as well as their services. Their work is just as great! We look forward to many more opportunities to work with this team.”
Lindsey Bennett
“MPC Sandblasting has performed admirably in providing blasting services to US Screen in support of our operations. Their approach is very professional and their pricing is good for the quality of the work performed.”
Doug Dickason
“MPC is a fantastic company to work with. They are really fast with getting information as needed and do great work.”
Danny Keith
“MPC painted our 6 bulk storage tanks and did a great job!”
James Deiter
“Markley Precision Company was easy to work with and the quality of their work is second to none. I have used them on three separate projects and have been very pleased with the quality of work each time. No job seems to be too big or too small. I have used them to blast and paint a 30,000 gallon propane tank, and to blast and paint our vertical bulk storage vessels for nitrogen, oxygen, and argon. They've even done work for me on the Lake Erie Islands, as well, which presented logistical challenges, but MPC didn't miss a beat. I would recommend MPC 100 out of 100 times.”
Matt Drennen
“Very happy with the work completed so far with MPC. Last year, I had them paint 5 of our 30,000 gallon bullet tanks. The work was completed quickly and professionally. With a years worth of age on them now, they still look as good as new! I was so pleased with their work on the tanks, I hired them to complete an even larger, more complex project blasting and recoating a natural gas processing mechanical refrigeration unit. Even when some concerns came up, they quickly remediated the situation. Extremely happy with the work they've performed!”
Paul Teeters
“MPC Sandblasting and Painting have serviced various locations for us. They have ensured a positive experience from start to finish. The staff is very helpful and quick with responses as well as their services. Their work is just as great! We look forward to many more opportunities to work with this team.”
Lindsey Bennett
“MPC Sandblasting has performed admirably in providing blasting services to US Screen in support of our operations. Their approach is very professional and their pricing is good for the quality of the work performed.”
Doug Dickason
“MPC is a fantastic company to work with. They are really fast with getting information as needed and do great work.”
Danny Keith
“MPC painted our 6 bulk storage tanks and did a great job!”
James Deiter
Ready to Get Started?
Contact us today for a free quote on your project. Our team of experts is ready to help with all your industrial painting and sandblasting needs.