Industrial Sandblasting Contractor For Coating-Ready Steel
Ohio-based abrasive blasting crews for tanks, structural steel, equipment, facilities, and infrastructure across the Midwest and nationwide.
MPC provides industrial sandblasting contractor services for commercial and industrial assets that need old coating, corrosion, mill scale, or contaminants removed before inspection, repair, painting, or lining.
Our crews prepare tanks, structural steel, heavy equipment, machinery, fabricated steel, and facility surfaces to the SSPC/NACE profile and cleanliness requirements in the project specification.
Containment, dust control, access, safety, cleanup, and coating-ready handoff are planned before mobilization. This is contractor-grade industrial blasting, not equipment rental, DIY blasting, consumer auto/frame work, powder coating, or pressure washing.
Our Work
Storage tank blasting
Steel fabrication blasting
Commercial wall blasting
Industrial steel blasting
Steel beam after blasting
Storage tank blasting
Steel fabrication blasting
Commercial wall blasting
Industrial steel blasting
Steel beam after blasting
Industrial Sandblasting Scope
Industrial Assets We Blast
Commercial and industrial surfaces prepared for inspection, repair, coating, or return to service.
- Storage tanks and process tanks
- Structural steel, beams, columns, and platforms
- Heavy equipment, machinery, and crane frames
- Manufacturing, utility, public works, and infrastructure assets
Industrial Assets We Blast
Commercial and industrial surfaces prepared for inspection, repair, coating, or return to service.
- Storage tanks and process tanks
- Structural steel, beams, columns, and platforms
- Heavy equipment, machinery, and crane frames
- Manufacturing, utility, public works, and infrastructure assets
Coating-Ready Surface Preparation
Blast planning focused on the coating system, profile requirement, and field conditions.
- SSPC SP5, SP6, SP10, or project-specific requirements
- Surface profile verification for primer and topcoat adhesion
- Dust, salt, chloride, and cleanliness checks where required
- Blast-and-paint coordination when coating is part of scope
Commercial Mobilization
Crews mobilize with the equipment and controls needed for commercial job sites.
- Ohio-based crews serving the Midwest and nationwide projects
- Containment and dust-control setup
- Access, shutdown, and active-facility scheduling
- Cleanup and documented handoff
Our Process
Consultation & Assessment
We evaluate the asset, coating condition, substrate, access, schedule, and specification before recommending the blasting method and media.
We evaluate the asset, coating condition, substrate, access, schedule, and specification before recommending the blasting method and media.
We select the media and equipment needed to remove coatings or corrosion while achieving the required surface profile.
We set up containment, collection, ventilation, and safety controls appropriate for the site and scope.
Our operators blast to the required cleanliness and profile while monitoring conditions that affect coating readiness.
We verify the prepared surface, clean the work area, and coordinate the next coating step when painting or lining is part of the project.
The MPC Difference
Why Choose Markley's Precision
Industrial Surface Preparation Focus
Crews built for tanks, structural steel, heavy equipment, fabrication, and operating commercial facilities.
SSPC/NACE Profile Control
Surface profile, cleanliness, dust, salts, chlorides, and coating readiness are checked against the project specification.
Containment & Dust Planning
Containment, collection, wet abrasive options, and site controls are planned around active industrial environments.
Method Matched To The Asset
Abrasive, wet abrasive, dry ice, soda, shot, bristle, laser, and water-jetting options are selected for the substrate and coating system.
Zero-Silica Media Options
Recycled crushed glass, garnet, and other silica-free media options support safer work areas and cleaner project closeout.
Blast-And-Coat Coordination
When coating is part of the scope, blasting and painting can be scheduled together to reduce downtime and flash-rust risk.
OSHA, EPA & DOT Awareness
Safety, environmental controls, access planning, and site documentation are part of the commercial project workflow.
Ohio, Midwest & Nationwide
Ohio-based crews mobilize for commercial and industrial sandblasting projects across the Midwest and the United States.
Frequently Asked Questions
We mobilize for commercial and industrial assets such as tanks, structural steel, heavy equipment, facilities, and infrastructure. Our work includes surface-prep planning, containment, SSPC/NACE profile targets, safety coordination, cleanup, and coating-ready handoff.
No. MPC is a contractor for commercial and industrial sandblasting projects. We do not rent equipment, support DIY blasting, perform consumer auto/frame restoration, provide powder coating, or sell pressure washing services.
Yes. MPC is based in Ohio and mobilizes for industrial sandblasting work across the Midwest and nationwide when the project scope warrants a traveling commercial crew.
What Our Clients Say
“Markley Precision Company was easy to work with and the quality of their work is second to none. I have used them on three separate projects and have been very pleased with the quality of work each time. No job seems to be too big or too small. I have used them to blast and paint a 30,000 gallon propane tank, and to blast and paint our vertical bulk storage vessels for nitrogen, oxygen, and argon. They've even done work for me on the Lake Erie Islands, as well, which presented logistical challenges, but MPC didn't miss a beat. I would recommend MPC 100 out of 100 times.”
Matt Drennen
“Very happy with the work completed so far with MPC. Last year, I had them paint 5 of our 30,000 gallon bullet tanks. The work was completed quickly and professionally. With a years worth of age on them now, they still look as good as new! I was so pleased with their work on the tanks, I hired them to complete an even larger, more complex project blasting and recoating a natural gas processing mechanical refrigeration unit. Even when some concerns came up, they quickly remediated the situation. Extremely happy with the work they've performed!”
Paul Teeters
“MPC Sandblasting and Painting have serviced various locations for us. They have ensured a positive experience from start to finish. The staff is very helpful and quick with responses as well as their services. Their work is just as great! We look forward to many more opportunities to work with this team.”
Lindsey Bennett
“MPC Sandblasting has performed admirably in providing blasting services to US Screen in support of our operations. Their approach is very professional and their pricing is good for the quality of the work performed.”
Doug Dickason
“MPC is a fantastic company to work with. They are really fast with getting information as needed and do great work.”
Danny Keith
“MPC painted our 6 bulk storage tanks and did a great job!”
James Deiter
“Markley Precision Company was easy to work with and the quality of their work is second to none. I have used them on three separate projects and have been very pleased with the quality of work each time. No job seems to be too big or too small. I have used them to blast and paint a 30,000 gallon propane tank, and to blast and paint our vertical bulk storage vessels for nitrogen, oxygen, and argon. They've even done work for me on the Lake Erie Islands, as well, which presented logistical challenges, but MPC didn't miss a beat. I would recommend MPC 100 out of 100 times.”
Matt Drennen
“Very happy with the work completed so far with MPC. Last year, I had them paint 5 of our 30,000 gallon bullet tanks. The work was completed quickly and professionally. With a years worth of age on them now, they still look as good as new! I was so pleased with their work on the tanks, I hired them to complete an even larger, more complex project blasting and recoating a natural gas processing mechanical refrigeration unit. Even when some concerns came up, they quickly remediated the situation. Extremely happy with the work they've performed!”
Paul Teeters
“MPC Sandblasting and Painting have serviced various locations for us. They have ensured a positive experience from start to finish. The staff is very helpful and quick with responses as well as their services. Their work is just as great! We look forward to many more opportunities to work with this team.”
Lindsey Bennett
“MPC Sandblasting has performed admirably in providing blasting services to US Screen in support of our operations. Their approach is very professional and their pricing is good for the quality of the work performed.”
Doug Dickason
“MPC is a fantastic company to work with. They are really fast with getting information as needed and do great work.”
Danny Keith
“MPC painted our 6 bulk storage tanks and did a great job!”
James Deiter
Ready to Get Started?
Contact us today for a free quote on your project. Our team of experts is ready to help with all your industrial painting and sandblasting needs.